Answer: Typically a channel will read "OPEN" when either the positive or negative wire of the thermocouple has been damaged or has cracked. The most common place to find this is at the tip of the thermocouple whereby the twisted pair junction needs to be re-made. Ideally the junction should also be welded using a [...]
Question: On occasion one of the channels on my Kaye Validator 2000 data logger reads “UNDER” or “OVER”, what’s the cause of this?
Answer: Typically a channel will read "UNDER" or "OVER" when water has entered the SIM of the Kaye Validator 2000 data logger and the cold junction has become wet. Check each thermocouple wire to ensure that you have added drip-cuts to each wire 1m from the SIM to allow the condensate to drain away from [...]
Sterility is defined as an absolute term - that means absence of all viable forms of life. When individual items have a probability of being non-sterile → a sterility assurance level (SAL), equal to or better than 10-6. There are basically five methods of sterilization... To read more about Sterilisation Presentation, please fill out the [...]